冷再生工艺流程简洁明了，施工设备少，对交通出行影响体现不比较敏感全部冷再生机械设备组成能够处在同一条行车道内，不危害另一条行车道机动车行驶，可开展敞开式施工，非常适用车流量很大或路宽窄小状况下的道路的施工。所以冷再生租用施工的性价比之高很明显，下面冷再生机租赁厂家为您讲解一番相关内容。

The cold recycling process is simple and clear, with few construction equipment, and is not sensitive to the impact of traffic. All cold recycling mechanical equipment components can be located in the same lane, which does not harm the driving of motor vehicles in another lane. Open construction can be carried out, which is very suitable for the construction of roads with large traffic flow or narrow road width. Therefore, the cost performance of the cold recycling rental construction is obviously high. The following cold recycling machine rental manufacturer will explain some related content to you.

就地冷再生施工能够依据不一样道路旧起模原材料的具体情况开展设计方案，挑选不一样的防腐剂，能够确保再生原材料的品格和施工品质，产生施工成形厚而匀称的粘接层，进而确保了检修后道路的应用限期。

The on-site cold recycling construction can carry out the design scheme according to the specific conditions of the old mold lifting raw materials of different roads, select different preservatives, ensure the quality and construction quality of the recycled raw materials, generate thick and symmetrical bonding layer for construction, and thus ensure the application deadline of the roads after maintenance.

一般冷再生层的沥青混合料选用来源于原貌路面构造的沥青道路料RAP，其冷再生层的点评关键根据其抗压强度来操纵，其抗压强度依路面级别的不一样由技术部来明确，七天无侧限抗拉强度应达2MPa之上，但针对混凝土冷再生而言，混凝土使用量一般不可超出6%。

Generally, the asphalt mixture of the cold recycling layer is RAP asphalt pavement material from the original pavement structure. The key to the evaluation of the cold recycling layer is based on its compressive strength. The technical department will determine its compressive strength according to the different pavement levels. The seven day unconfined tensile strength should be above 2MPa, but for the cold recycling of concrete, the amount of concrete used should generally not exceed 6%.

假如再生层中粉料过少，RAP配合比不科学(其配合比操纵曲线图可参考混凝土平稳砂砾石配合比曲线图)，但经实验后掺入一部分规格型号料来调节配合比，在确保混凝土一切正常使用量的前提条件下确保再生层品质。

If there is too little powder in the recycled layer, the RAP mix proportion is unscientific (the mix proportion control curve can refer to the concrete stable sand gravel mix proportion curve), but after the experiment, some specifications and models are added to adjust the mix proportion, so as to ensure the quality of the recycled layer on the premise of ensuring all the normal use of concrete.

而道路就地冷再生机因为所有利用了旧的路面起模原材料，进而降低了道路检修或更新改造时旧起模原材料的基坑开挖、运送、废置和新型材料的购买，进而造成成本费大幅降低。选用道路就地冷再生比传统式方法对比，伴随着再生层薄厚的不一样，能够控制成本，冷再生路面薄厚越厚，控制成本越多。

The road in place cold recycling machine, because all the raw materials for the old pavement formwork lifting are used, thus reducing the excavation, transportation, waste and purchase of new materials of the old formwork lifting raw materials during the road maintenance or renovation, thus resulting in a significant reduction in costs. Compared with the traditional method, the in situ cold recycling of roads can control the cost due to the difference in the thickness of the recycling layer. The thicker the cold recycling pavement is, the more the cost will be controlled.

在路面农村基层因其原料的再利用可节约很多项目投资，在低级别路面中，因用冷再生加工工艺可提升路面农村基层级别而减少整体面层的资金投入，这类客观性具体优势的存有是促使就地冷再生技术性遭受认可而且获得迅速发展趋势的原始动力。

The recycling of raw materials can save a lot of project investment in rural pavement base course. In low-grade pavement, the use of cold recycling processing technology can improve the level of rural pavement base course and reduce the investment in the overall surface course. The existence of such objective specific advantages is the original power to promote the recognition of on-site cold recycling technology and obtain rapid development trend.

做为一种效率高、、环境保护道路检修方式和新技术新工艺，路面冷再生机早已变成道路更新改造的关键方式之一。您有问题或者需求可以随时来我们网站进行咨询！

As a high efficiency, environmental protection, energy-saving, environmental protection road maintenance method and new technology, road cold recycling machine has already become one of the key ways of road renewal and reconstruction. You can come to our website at any time if you have any questions or needs Consult!