冷再生的施工技术包含什么内容呢？这个问题是近来不少人会咨询到的，为了让大家更好的完成施工并有一个很好的施工质量，下面冷再生机租赁厂家为您讲讲。

What does the construction technology of cold regeneration include? Many people will ask this question recently. In order to let everyone better complete the construction and have a good construction quality, the following cold recycling machine rental manufacturer will tell you about it.

使用稳定就地冷再生技术进行道路维修的施工工艺流程是进行进行维修路段交通道路的封闭，然后进行施工放样确保施工按照图纸进行，将原道路进行清洗并准备好需要添加的原材料，准备好冷再生机组进行破碎和拌和，将混合料进行摊铺碾压，接缝和掉头处进行处理，在接受检查监督确认质量合格之后注意养生期间的保养，后就可以投入使用了。

The construction process of using the stable in place cold recycling technology for road maintenance is first to close the traffic road of the maintenance section, then to carry out the construction setting out to ensure that the construction is carried out according to the drawings, to clean the original road and prepare the raw materials to be added, to prepare the cold recycling unit for crushing and mixing, to pave and roll the mixture, and to conduct professional treatment at the joints and turns, After receiving inspection and supervision to confirm that the quality is qualified, pay attention to the maintenance during the curing period, and then it can be put into use.

冷再生技术进行施工前，需要许多的准备工作才能进行正式施工。准备工作完成的好坏，决定了之后施工结果的质量好坏，如下：

Before the construction of cold regeneration technology, a lot of preparatory work is required before formal construction. The quality of the subsequent construction results depends on the quality of the preparation work, as follows:

我们要对需要进行维修的破损路面进行取样分析，取样时要注意均匀取样，尽量保证取样点所分析出的数据符合道路的整体情况。在进行破旧路面的分析中应当测量出破损路面的水泥碎石各自含量，以及道路建设成功时所需要的抗压强度和佳含水量。

We should take samples of the damaged pavement that needs to be repaired for analysis. When taking samples, we should pay attention to uniform sampling, and try to ensure that the data analyzed at the sampling points conform to the overall situation of the road. In the analysis of dilapidated pavement, the respective content of cement macadam of the damaged pavement, as well as the compressive strength and good water content required for successful road construction should be measured.

根据已经得出的破损路面的原材料比例选择添加到再生材料中的新材料比例。新材料使用的水泥种类和碎石大小以及改变其性能的添加剂，都要按照前一部的准备工作进行配置，拌和时使用的水可以采取饮用水。

Select the proportion of new materials added to the recycled materials according to the proportion of raw materials of the damaged pavement. The type of cement and the size of crushed stone used for new materials, as well as the additives to change their performance, shall be configured according to the preparation of the previous part. Drinking water can be used for mixing.

我们准备冷再生技术施工所使用的机械，包括加工原材料的冷再生机、进行碾压的胶轮压路机、辅助养生的洒水车和其他推土机平地机，等等机械设备。

We prepare the machinery used in the construction of cold recycling technology, including cold recycling machines for processing raw materials, rubber tyred rollers for rolling, watering carts for auxiliary curing and other bulldozer graders, and other mechanical equipment.

要对这些机械设备进行检查运行状况，对有问题的设备要进行修理，避免出现已经开始施工，由于机械故障所导致的拖延施工时间的事件发生。更多相关内容就来我们网站咨询吧！

Check the operation condition of these mechanical equipment, and repair the problematic equipment to avoid the occurrence of events that delay the construction time due to mechanical failures that have already started construction. More relevant content will come to our website Consult!