在人们开始关注不同行业的相关信息时，每个行业的特殊点开始得到人们的关注，比如道路施工方面，冷再生机是一种非常好的旧沥青路面改造机器。旧沥青路面改造机器冷再生机如何？冷再生机出租厂家为您讲解。

When people began to pay attention to the relevant information of different industries, the special points of each industry began to get people's attention. For example, in road construction, the cold recycling machine is a very good old asphalt pavement reconstruction machine. How about cold recycling machine for old asphalt pavement reconstruction? The cold regeneration machine rental manufacturer will explain it to you.

1、沥青路面就地冷再生并不是人们通常所理解的将已破损的沥青路面重新恢复到完好的原始状态，而是将旧面层和部分基层一并打碎混合之后就地改建成新的基层(或底基层)。严格地讲，此工艺应该称之为旧沥青路面材料的就地再利用。

1. Cold in place recycling of asphalt pavement is not generally understood to restore the damaged asphalt pavement to its original state, but to smash and mix the old surface course and part of the base course together and then rebuild them into a new base course (or subbase). Strictly speaking, this process should be called the in-situ reuse of old asphalt pavement materials.

路面就地冷再生的工作原理，是在原有旧路铺层的基础上，按照新的设计要求，选择性地掺入适量的骨料、水泥、石灰、粉煤灰、乳化沥青、泡沫沥青和水等外加材料，利用就地冷再生设备，实际上就是一台大型的稳定土路拌机),。

The working principle of in situ cold recycling of pavement is to selectively add appropriate amount of aggregate, cement, lime, fly ash, emulsified asphalt, foam asphalt, water and other external materials based on the original old pavement according to the new design requirements. In fact, the in situ cold recycling equipment is a large stabilized soil road mixer,.

在自然常温下，就地连续完成对旧铺层(路面和部分基层)的铣刨、破碎、添加料、拌和、摊铺等工序，随后进行找平和碾压，修建出一种特殊级配的道路基层(或底基层)。

Under natural normal temperature, the milling, crushing, adding, mixing, paving and other processes of the old pavement (pavement and part of the base course) are continuously completed on the spot, followed by leveling and rolling to build a special graded road base (or subbase).

2、就地冷再生机适用范围广，施工优势明显，由于就地冷再生施工是将原道路的面层和基层变成了新的道路基层(或底基层)，致使新道路的面层少要在此标高的基础上开始铺筑。

2. The on-site cold recycling machine has a wide scope of application and obvious construction advantages. Because the on-site cold recycling construction is to change the surface course and base course of the original road into a new road base (or subbase), the surface course of the new road must be paved at least on the basis of this elevation.

况且在高标准的道路改造中，有时是将再生层作为底基层，在此基础上还要加铺二灰碎石等基层材料，这就使得改造之后的路面标高远远大于原来路面的标高，沿路构造物处路面的设计结构将随之发生变化。

Moreover, in the reconstruction of high standard roads, sometimes the recycled layer is used as the subbase, and on this basis, lime fly ash macadam and other base materials are also paved, which makes the pavement elevation after reconstruction much higher than the original pavement elevation, and the design structure of the pavement along the road structures will change accordingly.

如果在城市道路中采用此法施工，原有的排水系统也将随之受到一些影响。因此，对于路面标高有较严格限制的道路，不宜采用此法施工。

If this method is used in urban road construction, the original drainage system will also be affected. Therefore, this method should not be used for roads with strict limitation on pavement elevation.

针对旧沥青路面改造机器冷再生机如何的这个问题我们从以上两方面认识到了，您对此有什么相关事项咨询就来我们网站看看吧！

We have learned from the above two aspects about the problem of cold recycling machine for old asphalt pavement reconstruction. If you have any questions about this, please come to our website Look!