新闻中心
新闻资讯
联系我们
九五至尊9599cww
联系人:石总
电话:18264104888
地址:山东省济南市槐荫区经一路273号群盛华城
道路上使用冷再生机有哪些优点
来源:/ 日期:2022-09-23 发布人:
冷再生机是一种进行道路施工的机械,很多外行人对于使用这种机械进行施工的优点并不是很了解,接下来就让冷再生机租赁厂家为大家介绍一下道路上使用冷再生机有哪些优点。
The cold recycling machine is a kind of machine for road construction. Many laymen do not know the advantages of using this machine for construction. Next, let the cold recycling machine rental manufacturer introduce the advantages of using the cold recycling machine on the road.
使用这种方式进行路面的铺设相比于传统的路面施工经济成本更加的低,而且能够将旧铺层的材料积很额利用起来,那么对于新材料的需要就会比较的少,也就降低了经济成本。
Compared with the traditional pavement construction, the economic cost of pavement construction in this way is much lower, and the amount of materials in the old pavement can be used in a large amount, so there will be less demand for new materials, which will reduce the economic cost.
此外在进行施工的时候只进行一次性的施工,所以对于路面的基础伤害比较小,使用这种方法铺设的路面就可以更加的牢固,同时使用的寿命也会相对较长。
In addition, only one-time construction is carried out during the construction, so the damage to the pavement foundation is relatively small. The pavement paved with this method can be more solid, and the service life will be relatively long.
此外它的施工效率高。在传统的路面施工工艺中,采用铣刨机铣削旧路面,然后将其输送到搅拌站进行混合。随后,将其运回施工现场,并用摊铺机展开,辊子由辊子卷成。
In addition, its construction efficiency is high. In the traditional pavement construction process, the old pavement is milled by a milling machine, and then transported to the mixing plant for mixing. Then, it will be transported back to the construction site and spread with a paver, and the roller will be rolled by the roller.
而且局部冷回热器在施工过程中属于一种成型(即将铣刨、拌和、摊铺在冷再经过一次需要修补的路面后依次完成),它可以随着施工进度的进行而打开道路竣工。这能大大减少维护路面和提前开通交通所需的时间。
Moreover, the local cold regenerator is a kind of molding (that is, milling, mixing, and paving are completed successively after the cold road passes through the pavement that needs to be repaired again) during the construction process, and it can open the road for completion as the construction progress progresses. This can greatly reduce the time required to maintain the road surface and open the traffic ahead of time.
另外因为冷再生机经过铣刨机后,几乎所有的废品都可直接送到混合腔中并就地摊铺利用,减少新石料等材料的开采,无需考虑运输和堆垛问题。报废材料。很大的节省资源和保护环境。
In addition, after the cold recycling machine passes through the milling machine, almost all waste products can be directly sent to the mixing chamber and paved on the ground, reducing the mining of new stone and other materials, without considering the transportation and stacking problems. Scrap materials. It greatly saves resources and protects the environment.
冷再生过程不需要加热或搅拌物料,节约了大量的能量。冷再生再生料是一种回收废旧路面材料的设备。无污染,故称其为绿色建筑技术。冷凝法与传统施工方法相比,可节省大量的设备、人员、材料等,且相对成本低。
The cold regeneration process does not need to heat or stir materials, saving a lot of energy. Cold recycled material is a kind of equipment for recycling waste pavement materials. It is pollution-free, so it is called green building technology. Compared with the traditional construction method, the condensation method can save a lot of equipment, personnel, materials, etc., and the relative cost is low.
Nowadays, many roads are constructed with this kind of machinery. Of course, the correct operation methods and precautions should be understood. You can visit our website Ask about it!
下一篇:为什么利用冷再生机施工? 上一篇:冷再生机的维修与抢修什么区别
阅读/ Recommended reading
- 冷再生机租赁:就地冷再生施质量控制要点 2024-09-21
- 冷再生机租赁:维特根冷再生机W 240 CR,用途广泛显神功 2024-09-15
- 冷再生机租赁:就地冷再生施工技术的原理及其特点分析 2024-09-04
- 冷再生机租赁——保养注意事项 2024-09-02
冷再生机租赁:路拌/冷再生机,让你的施工过程始终“开挂”
[2018-08-23]
作为路面施工装备中的一员 路拌/冷再生机一直以来均在路面解决方案里占有重要作用。而RS500路拌/冷再生机,作为一款性能出色的路面养护设备,更是行业里同类产品中的佼佼者。发动...