对于任何设备来说，想要保证设备的正常运行，是需要进行养护工作的，冷再生设备也同样如此，不过该设备的养护有抢修与维修两种情况，这两种状态有什么区别呢？下面冷再生机租赁公司为您讲下。

For any equipment, maintenance is required to ensure its normal operation, as is the case for cold regeneration equipment. However, the maintenance of this equipment can be divided into emergency repair and maintenance. What is the difference between these two states? Now let's talk about it for you.

冷再生机施工时会产生均匀的较厚铺层内，不存在传统施工方法中出现的较薄铺层间的薄弱界面。因其具备、等优点而受到广大用户的喜爱，同时也可以改善施工条件，减轻经济压力，是许多小型施工单位的选择。

The cold recycling machine will produce a uniform thick layer during construction, and there is no weak interface between thin layers in traditional construction methods. Because of its environmental protection, energy conservation and other advantages, it is loved by the majority of users. It can also improve the construction conditions and reduce economic pressure. It is the choice of many small construction units.

维修的主要目的在于尽可能使设备保持良好的运行状态，一旦有工作需要就可以立即进入工作的状态。而且维修也是有既定的流程要求的，主要可以分为诊断、定位、隔离、修复校正等几个步骤，而且都需要有一定技能的维修人员来完成。总的来说，维修其实更侧重于是在工作间隙、在设备不工作的时候进行的。

The main purpose of maintenance is to keep the equipment in good operating condition as far as possible, and it can enter into working condition immediately once there is a need for work. Moreover, maintenance also has established process requirements, which can be mainly divided into several steps, such as diagnosis, positioning, isolation, repair and correction, and all of them require maintenance personnel with certain skills to complete. In general, maintenance is more focused on the work gap and when the equipment is not working.

而如果遇到了比较紧急的情况，再按照平时维修的标准和程序进行修复的话，就会花费很多的时间，会严重影响到施工的进度和工期，同时也会降低冷再生机的利用率，这时候我们就需要进行设备抢修工作，以达到让设备快速恢复工作状态，保证工程进度的目的。

In case of an emergency, it will take a lot of time to repair according to the normal maintenance standards and procedures, which will seriously affect the construction progress and duration, and will also reduce the utilization rate of the cold regenerator. At this time, we need to carry out equipment repair work to quickly restore the equipment to its working state and ensure the project progress.

此外每天作业后应该沥青设备内的残余水泥混凝土，使拌刀磨损减小，延长了拌刀使用寿命;整机所有器件的尘土，对润滑部位加注黄油，使整机润滑部件的润滑情况良好，减小了易损件的磨损，从而减少了因磨损而出现的机械故障。

In addition, the residual cement concrete in the asphalt equipment shall be removed after daily operation, so as to reduce the wear of the mixing knife and prolong the service life of the mixing knife; Remove the dust from all components of the whole machine, and add grease to the lubricating parts to ensure good lubrication of the lubricating parts of the whole machine, reduce the wear of wearing parts, and thus reduce the mechanical failure caused by wear.

检查各紧固件及易损件，发现问题及时予以解决，使有些故障排除在未出现以前，做到防患于未然;能坚持每班保养，沥青设备使用寿命平均可延长工作时间800h，拌刀可延长600h。

Check all fasteners and wearing parts, and solve problems found in time, so that some faults can be eliminated before they occur, so as to prevent problems before they occur; The maintenance can be carried out every shift. The service life of asphalt equipment can be extended by 800h on average, and the mixing knife can be extended by 600h.

以上是对于冷再生机的维修与抢修区别的简单介绍，希望可以对您有所帮助。我公司是的道路施工设备生产厂家，在设备销售的同时还提供设备的租赁服务，如果您有相关需要的话，可以致电我公司进行咨询。

The above is a brief introduction to the difference between the repair and emergency repair of the cold regenerator. I hope it can help you. Our company is a professional manufacturer of road construction equipment. We also provide equipment leasing services while selling equipment. If you have any related needs, you can call our company Consult.