冷再生机是一种效率高、多用途的施工机械。主要用于沥青混凝土路面的铣刨以及添加沥青、水等材料后的旧沥青路面的再生。也可用于公路、城乡道路、机场、码头、停车场等工程的基层、底层稳定土现场就地拌和作业。那么，冷再生机设备的相关内容您知道多少呢？

Cold regenerator is a kind of construction machinery with high efficiency and multi-purpose. It is mainly used for milling of asphalt concrete pavement and regeneration of old asphalt pavement after adding asphalt, water and other materials. It can also be used for on-site mixing of stabilized soil at the base and bottom of highways, urban and rural roads, airports, wharves, parking lots and other projects. How much do you know about the cold regenerator equipment?

冷再生机一次破碎拌合宽度为2.4米，工作时经常会有一辆水罐车紧跟作业保证拌合用水，拌合过程中按照试验单所规定的高于平时含水量，除此之外还需要有一辆水罐车需满水随时处于待命状态，一旦跟再生机作业的水罐没水了，需即刻补上。

The one-time crushing and mixing width of the cold regenerator is 2.4m. During operation, a water tanker will often follow the operation to ensure the mixing water. During the mixing process, the water content specified in the test sheet is higher than the normal water content. In addition, a water tanker needs to be full of water and on standby at any time. Once there is no water in the water tanker working with the regenerator, it needs to be supplemented immediately.

冷再生机的使用需要进行对再生混合料拌，应立即用平地机初步整形。在直线和不设超高的平曲线段，平地机由路肩向路中心进行刮平。很多冷再生机使用的时候，都会面对这点，对路面的整形过程中应及时粗细料离析现象。

The use of the cold regenerator requires mixing the recycled mixture, and the grader shall be used immediately for preliminary shaping. In straight line and flat curve sections without superelevation, the grader shall scrape from the shoulder to the center of the road. Many cold recycling machines will face this when they are used. The segregation of coarse and fine materials should be eliminated in time during the shaping of the pavement.

既由人工配合机械把大块没有破碎掉的旧路料掉。冷再生机租赁时候一般行走比较困难，则需先由冷再生机对旧路面层进行铣刨后，在破碎料上再铺水泥，进行冷再生拌合施工。

The old road materials that have not been broken are removed manually and mechanically. When the cold recycling machine is leased, it is generally difficult to walk, so it is necessary to mill the old pavement layer by the cold recycling machine first, and then pave cement on the crushed materials for cold recycling mixing construction.

此外冷再生机租赁人员认为每天作业后应该设备内的残余水泥混凝土，使拌刀磨损减小，延长了拌刀使用寿命；整机所有器件的尘土，对润滑部位加注黄油，使整机润滑部件的润滑情况良好，减小了易损件的磨损，从而减少了因磨损而出现的机械故障。

In addition, the residual cement concrete in the equipment shall be removed after daily operation to reduce the wear of the mixing knife and prolong the service life of the mixing knife; Remove the dust from all components of the whole machine and add grease to the lubricating parts to make the lubricating parts of the whole machine well lubricated, reduce the wear of vulnerable parts, and thus reduce the mechanical failure caused by wear.

以上是关于冷再生机设备使用的一些常见事项，大家如有更多的想法和意见欢迎洽谈合作，本公司租赁冷再生机等设备，您可以关注我们网站www.tclqgc.com！

The above are some common matters about the use of cold regeneration equipment. If you have more ideas and opinions, you are welcome to negotiate and cooperate. Our company leases cold regeneration machines and other equipment. You can pay attention to our website www.tclqgc com！