Cost savings

在沥青路面的大、中修中使用全深式就地冷再生基层施工工艺与传统的修整沥青路面相比，极大的节约了修整成本。

Compared with traditional asphalt pavement repair, the use of full depth in-situ cold recycled base construction technology in large and medium maintenance of asphalt pavement greatly saves repair costs.

工期缩短

Shorten the construction period

在沥青路面中使用全深式就地冷再生基层施工工艺能够有效的缩短施工工期，尽快使得维修好的沥青路面投入到使用中，同时也能有效的提高施工区域内行车水平。这一施工工艺相比原来的施工工艺来说更加的简便，同时也可以在施工过程中开放交通，保证道路的畅通，不会造成交通拥堵现象。

The use of full depth on-site cold recycling base construction technology in asphalt pavement can effectively shorten the construction period, quickly put the repaired asphalt pavement into use, and also effectively improve the safety driving level in the construction area. This construction process is more simple and efficient compared to the original construction process, and can also open up traffic during the construction process, ensuring smooth road flow and avoiding traffic congestion.

节约资源

save resources

在全深式就地冷再生基层施工工艺中能够有效的节约资源，促进对环境的保护。它在施工过程中能够将原本在沥青路面建设中使用过的材料进行二次回收利用，特别是一些砂石材料，避免了再次开采这类资源，造成浪费。在回收利用这一系列材料中也能够避免这些材料被废弃占用土地资源，造成环境污染。

In the construction process of fully deep on-site cold recycling base layer, it can effectively save resources and promote environmental protection. It can recycle and reuse the materials originally used in asphalt pavement construction, especially some sand and gravel materials, during the construction process, avoiding the waste of re mining such resources. In the recycling and utilization of this series of materials, it is also possible to avoid these materials being abandoned and occupying land resources, causing environmental pollution.

提高路面的平整度

Improve the smoothness of the road surface

在沥青路面修复过程中采用全深式就地冷再生基层施工工艺能够有效的保留现有道路的完整性结构与净空，同时还能够有效的纠正路面纵断面以及横坡现象，极大的提高了路面的平整度。

In the process of repairing asphalt pavement, the use of the full depth on-site cold recycling base construction process can effectively preserve the integrity structure and clearance of the existing road, while also effectively correcting the longitudinal and transverse slope phenomena of the road surface, greatly improving the smoothness of the road surface.

冷再生基层施工工艺能够复原

The construction process of cold recycled base can be restored

冷再生基层施工工艺适用于修复大面积道路损毁，当采用这一施工工艺进行修复后，路面的使用性能与原先完整的路面无差别，新铺设的路面基本符合原本的路面性能。

The cold recycled base construction process is suitable for repairing large-scale road damage. After using this construction process for repair, the performance of the road surface is no different from the original complete road surface, and the newly laid road surface basically conforms to the original road surface performance.

全深式就地冷再生施工工艺与质量控制措施

Construction technology and quality control measures for full depth on-site cold regeneration

全深式就地冷再生施工工艺原理

Principle of fully deep on-site cold regeneration construction process

全深式就地冷再生施工工艺需要将沥青路面中全部厚度的沥青面层与预定比例汇总的下卧层统一进行粉碎与搅拌融合在一起，以此来提供升级的均匀基层材料的维修技术。若旧材料中没有足够的力学性能与结构强度承载预期中的荷载，那么就需要在其中加入新的集料，同时也需要按照一定的比例加入定量的化学稳定剂，以此来达到预期的效果。

The full depth on-site cold recycling construction process requires the crushing and mixing of the entire thickness of the asphalt surface layer in the asphalt pavement and the predetermined proportion of the underlying layer, in order to provide upgraded and uniform base material maintenance technology. If the old material does not have sufficient mechanical properties and structural strength to carry the expected load, then new aggregates need to be added to it, and a certain proportion of chemical stabilizers need to be added to achieve the expected effect.

感谢您的阅读，此文的文章来源：冷再生机租赁更多的内容和问题请点击：我们会继续努力的为您提供服务，感谢您的支持！

Thank you for reading. The source of this article is: Cold Recycling Machine Rental. For more information and questions, please click on: We will continue to work hard to provide you with services. Thank you for your support!