冷再生机是一种率、多用途的施工机械。主要用于沥青混凝土路面的铣刨以及添加沥青、水等材料后的旧沥青路面的再生。也可用于公路、城乡道路、机场、码头、停车场等工程的基层、底层稳定土现场就地拌和作业。下面冷再生机出租厂家为您介绍下内容：

Cold regeneration machine is a high-efficiency and multi-purpose construction machinery. Mainly used for milling asphalt concrete pavement and the regeneration of old asphalt pavement after adding materials such as asphalt and water. It can also be used for on-site mixing of base and bottom stabilized soil in projects such as highways, urban and rural roads, airports, docks, parking lots, etc. The manufacturer of the cold regeneration machine rental will introduce the following content to you:

较之传统的道路维修改造方法，道路就地冷再生工艺有着无可比拟的诸多优点。

Compared to traditional road maintenance and renovation methods, the on-site cold regeneration process of roads has many incomparable advantages.

1、成本低

1. Low cost

根据国外的施工资料介绍，与在旧铺层上加铺新料的方法相比，就地冷再生约可降低成本20%~46%。

According to foreign construction materials, compared to the method of adding new materials to the old pavement layer, on-site cold recycling can reduce costs by about 20% to 46%.

2、提高旧路等级

2. Raise the level of old roads

可以通过基层承载力的提高从根本上实现道路等级的提高，这对低等级公路尤其有特殊意义。

The improvement of road grade can be fundamentally achieved through the improvement of grassroots bearing capacity, which is of special significance for low-grade highways.

3、结构的完整性

3. Structural integrity

冷再生施工产生的均匀的较厚铺层内，不存在传统施工方法中有时出现的较薄铺层间的薄弱界面。

There is no weak interface between the thinner layers that sometimes occurs in traditional construction methods within the uniform and thicker layers produced by cold regeneration construction.

4、不损坏路基

4. Not damaging the roadbed

由于冷再生施工为一次性作业方式，再生机组在暴露的路基上只通过一次。所以与传统施工方法相比，对路基的损害较小。

Due to the one-time operation of cold regeneration construction, the regeneration unit only passes through the exposed roadbed once. So compared to traditional construction methods, the damage to the roadbed is relatively small.

5、节约材料

5. Material saving

所有旧铺层材料全部就地利用，从而大大减少了新材料的用量，保护了资源。

All old paving materials are utilized on-site, greatly reducing the amount of new materials and protecting resources.

6、工期短

6. Short construction period

由于不存在旧料的运输问题，不需要其他机械对旧料的靶松和破碎，不需要大块材料的去除和专门破碎，更重要的是施工过程的一次性作业特点大大简化了施工程序，从而节约了施工时间。

Due to the absence of transportation issues for old materials, there is no need for other machinery to target and crush old materials, and there is no need for the removal and specialized crushing of large blocks of materials. More importantly, the one-time operation characteristics of the construction process greatly simplify the construction process, thereby saving construction time.

7、保护环境

7. Protecting the environment

因为旧料的利用大大减少了新材料的开采量，也不存在旧料的运输和堆放问题。从根本上满足了环境保护的要求。还有什么事项随时来咨询我们！

Because the utilization of old materials greatly reduces the mining output of new materials, there is no problem of transportation and stacking of old materials. Fundamentally meeting the requirements of environmental protection. Feel free to consult us on any other matters !