新闻中心
新闻资讯
联系我们
九五至尊9599cww
联系人:石总
电话:18264104888
地址:山东省济南市槐荫区经一路273号群盛华城
冷再生机出租优点表现在五个方面
来源:/ 日期:2023-02-15 发布人:
冷再生机其实就是用来对我们的路面进行铣刨工作的,同时还可以添加沥青,它的工作效率是非常高的,可以给我们节省很多的劳动时间的。那么您知道冷再生机出租的优点是什么吗?
In fact, the cold recycling machine is used for milling our pavement and adding asphalt. Its work efficiency is very high, which can save us a lot of labor time. Do you know the advantages of renting cold regenerator?
1、简化施工程序。利用铣削刨削加工的冷再生设备,对旧路面材料进行铣削加工,直接将用于铣刨和刨削的废料混合,直接在混合室中传播。建筑程序简化。
1. Simplify construction procedures. Use the cold recycling equipment for milling and planing to mill the old pavement materials, directly mix the waste materials used for milling and planing, and spread them directly in the mixing chamber. Simplify construction procedures.
2、防止因道路施工造成交通阻塞。因为冷凝器省去了施工过程中的运输和搅拌工序,所以现场投资相对较少。这样可以有效地降低道路建设带来的交通负荷。因为冷热交换器在施工侧施工,所以可选择一半施工,一半道路维修,使道路能够修复,不影响正常使用的交通。
2. Prevent traffic jam caused by road construction. Because the transportation and mixing procedures in the construction process are omitted from the condenser, the on-site investment is relatively small. This can effectively reduce the traffic load brought by road construction. Because the cold and heat exchanger is constructed on the construction side, half of the construction and half of the road maintenance can be selected, so that the road can be repaired without affecting the normal use of traffic.
3、施工效率高。在传统的路面施工工艺中,采用铣刨机铣削旧路面,然后将其输送到搅拌站进行混合。随后,将其运回施工现场,并用摊铺机展开,辊子由辊子卷成。而且局部冷回热器在施工过程中属于一种成型(即将铣刨、拌和、摊铺在冷再经过一次需要修补的路面后依次完成),它可以随着施工进度的进行而打开道路竣工。这能大大减少维护路面和提前开通交通所需的时间。
3. High construction efficiency. In the traditional pavement construction process, the old pavement is milled by a milling machine, and then transported to the mixing plant for mixing. Then, it is transported back to the construction site and spread with a paver. The rollers are rolled up by rollers. In addition, the local cold regenerator belongs to a kind of molding during the construction process (that is, milling, mixing, and paving are completed in turn after the cold pavement needs to be repaired again). It can open the road and complete the construction as the construction progress progresses. This can greatly reduce the time required to maintain the road surface and open the traffic in advance.
4、、。因为冷再生机经过铣刨机后,几乎所有的废品都可直接送到混合腔中并就地摊铺利用,减少新石料等材料的开采,无需考虑运输和堆垛问题。报废材料。大大的节省资源和保护环境。冷再生过程不需要加热或搅拌物料,节约了大量的能量。冷再生再生料是一种回收废旧路面材料的设备。无污染,故称其为绿色建筑技术。
4. Environmental protection and energy conservation. Because after the cold recycling machine passes through the milling machine, almost all the waste products can be directly sent to the mixing chamber and spread on the ground for utilization, reducing the mining of new stone and other materials, without considering the transportation and stacking problems. Scrap materials. Greatly save resources and protect the environment. The cold regeneration process does not need to heat or stir materials, saving a lot of energy. Cold recycled material is a kind of equipment for recycling waste pavement materials. No pollution, so it is called green building technology.
5、降低建设费用。冷凝法与传统施工方法相比,可节省大量的设备、人员、材料等,且相对成本低。
5. Reduce construction costs. Compared with the traditional construction method, the condensation method can save a lot of equipment, personnel, materials, and the relative cost is low.
The above is about the advantages of cold recycling machine rental. I hope that the article can give you some help and reference value. Customers who need to rent cold regenerators can contact our company directly Contact and consult.
下一篇:冷再生机的整形与碾压操作事项 上一篇:冷再生机械的相关技术难题要了解
阅读/ Recommended reading
- 冷再生机出租对道路施工行业的影响 2024-12-18
- 如何选择冷再生机出租服务 2024-12-16
- 冷再生机出租:道路施工的新选择 2024-12-11
- 冷再生机租赁在土壤稳定中的应用与优势 2024-12-09
冷再生机和路拌机区别
[2018-08-23]
冷再生机和路拌机在路面施工及维修中各有其独特的功能和适用场景,它们之间的主要区别体现在以下几个方面: Cold recycling machines and road mi...