就地冷再生技术的道路路面维修改造传统方法具有无可比拟的优势，下面冷再生机出租人员从7个方面来说明这个问题。

The traditional method of road surface maintenance and reconstruction with local cold recycling technology has incomparable advantages. The following is a description of this problem from seven aspects by the taxi staff of cold recycling machine.

1，成本低，根据海外引入的工程信息，与旧的层压材料新的覆盖方法相比，就地冷再生能的约20％的成本降低到46％。

1. Low cost. According to the engineering information introduced from overseas, compared with the new covering method of the old laminated material, the cost of local cold regeneration energy is reduced from about 20% to 46%.

2，提高老路的水平，我们可以提高基层的承载能力，改善道路，实现从根本上，这是低等级公路，特别是有特殊的含义。

2. To improve the level of the old road, we can improve the bearing capacity of the basic level, improve the road, and fundamentally realize that this is a low-grade highway, especially with special meaning.

3，厚度均匀的结构完整性，从而导致冷回收店内层，有有时可见之间没有淡薄接口覆盖传统的施工方法。

3. The structural integrity with uniform thickness leads to the fact that there is sometimes no thin interface between the inner layer of the cold recycling shop and the traditional construction method.

4，路基无损伤，仅通过一次由于一次性冷再循环做法，在暴露的路基再生单元。与传统的施工方法，对路基的损伤较小相比。

4. There is no damage to the subgrade, and the exposed subgrade is regenerated only once due to one-time cold recycling. Compared with the traditional construction method, the damage to the subgrade is less.

5，节约材料，所有的旧料全部帘布本地使用，从而大大降低了新材料，以保护资源量。

5. Save materials. All the old materials are used locally, which greatly reduces the new materials and protects the resources.

6，建设周期短，因为那里是老材料的任何运输问题，旧机器和目标上没有任何其他材料碎散，不需要专门的散装物料拆除和破碎，更重要的是，一次性操作的特点施工过程大大简化了施工工艺，节省了施工时间。

6. The construction period is short, because there is no transportation problem of old materials. There are no other materials scattered on the old machines and targets, and there is no need for special bulk materials to be dismantled and broken. More importantly, the construction process is greatly simplified and construction time is saved due to the characteristics of one-time operation.

7，冷再生保护环境，因为使用旧物大大降低新材料的开发，没有运输和堆放旧物的问题，以符合要求的根本。

7. Cold regeneration protects the environment, because the use of old materials greatly reduces the development of new materials, and there is no problem of transporting and stacking old materials, so as to meet the fundamental requirements of environmental protection.

冷再生机采用自动深度控制装置，负荷控制装置，使发动机的速度被保持在峰值扭矩，以维持高的产率。您有使用需求可以随时来我们网站进行咨询！

The cold regenerator adopts automatic depth control device and load control device to keep the engine speed at peak torque to maintain high productivity. You can come to our website at any time if you need to use it Consult!