新闻中心
新闻资讯
联系我们
九五至尊9599cww
联系人:石总
电话:18264104888
地址:山东省济南市槐荫区经一路273号群盛华城
路面冷再生机施工过程中常见问题及应对
来源:/ 日期:2022-11-18 发布人:
作为旧道路改造重生的大哥人物——路面冷再生机可是承担了它这个年龄所不该承受的压力和责任,只要是针对沥青道路改造的工程,都少不了它那厚重的身影,然而在施工过程中受到许多因素的影响总会出现许多问题,下面冷再生机出租厂家就来讲解一下哪些常见问题的解决方法。
As the big brother of the old road reconstruction, the road surface cold recycling machine has shouldered the pressure and responsibility that it should not bear at its age. As long as it is aimed at the asphalt road reconstruction project, it has its heavy shadow. However, many problems will always occur due to the influence of many factors in the construction process. The following cold recycling machine rental manufacturer will explain the solutions to some common problems.
1、要是混合物的局部含有很多的水,为了避免翻浆压不住。挖掘出水的混合物,用适宜的水分含量替代水的混合物(要是辊子的结构部位与混凝土相混),则在手动地面找平以后将辊子卷起。
1. If there is a lot of water in the local part of the mixture, in order to prevent the grout from boiling. For the mixture of excavated water, replace the mixture of water with appropriate moisture content (if the structural part of the roller is mixed with concrete), roll up the roller after manual leveling.
2、要是有工程施工区间,遇到漏条或跳打问题,在冷再生泄露区由人工服务铺装混凝土,再生器再循环再生器。要是部位不大,则应当用冷再生电机转子遮盖较小值。基本原则就是说防止多打,弄坏完成的结?构。
2. If there is a problem of missing strips or jumping in the construction section, the concrete shall be paved manually in the cold regeneration leakage area, and the regenerator shall recycle the regenerator. If the position is not large, the smaller value should be covered by the cold regeneration motor rotor. The basic principle is to prevent excessive knotting and damage the finished knot? Structure.
3、要是雨期混凝土已铺装在地面上,则依据降水的大小,适度地减小或终止冷回热器的供水,使振动压路机快速地被振动辊辗压,如轧辊。在搅拌轮的情况下,用振动压路机振动辗压2遍后即可。
3. If the concrete has been paved on the ground in rainy season, the water supply of the cold reheater shall be appropriately reduced or terminated according to the precipitation, so that the vibratory roller can be quickly rolled by the vibratory roller, such as the roller. In the case of mixing wheel, it can be rolled by vibratory roller twice.
The above is about the solutions to common problems in the construction process of pavement cold recycling machine. I hope it can help those who have problems in the construction. Come to our website for more information!
下一篇:路面冷再生机施工过程中常见问题解决 上一篇:冷再生机突出的四大优势
阅读/ Recommended reading
- 冷再生机租赁:就地冷再生施质量控制要点 2024-09-21
- 冷再生机租赁:维特根冷再生机W 240 CR,用途广泛显神功 2024-09-15
- 冷再生机租赁:就地冷再生施工技术的原理及其特点分析 2024-09-04
- 冷再生机租赁——保养注意事项 2024-09-02
冷再生机租赁:路拌/冷再生机,让你的施工过程始终“开挂”
[2018-08-23]
作为路面施工装备中的一员 路拌/冷再生机一直以来均在路面解决方案里占有重要作用。而RS500路拌/冷再生机,作为一款性能出色的路面养护设备,更是行业里同类产品中的佼佼者。发动...