冷再生机是一种率、多用途的施工机械，主要用于沥青混凝土路面的铣刨以及添加沥青、水等材料后的旧沥青路面的再生。下面冷再生机租赁厂家来讲讲冷再生施工租赁的场地准备。

Cold recycling machine is a high-efficiency and multi-purpose construction machine, mainly used for milling asphalt concrete pavement and recycling old asphalt pavement after adding asphalt, water and other materials. Let's talk about the site preparation for the cold regeneration construction lease.

（1）直接填筑的路基基底，施工前需经过检查签证；需求停止地基处置的基底需完成各项处置，并满足地基处置的请求。

(1) The subgrade base directly filled shall be inspected and signed before construction; For the base that needs to stop foundation treatment, all treatments shall be completed and the requirements for foundation treatment shall be met.

（2）场地应该保证足够的平整度，满足设备、人员进场请求。

(2) The site shall ensure sufficient flatness to meet the mobilization requirements of equipment and personnel.

（3）做好场地的暂时排水和防雨措施。依照施工运量和施工机械的大荷载建筑施工便道。

(3) Take temporary drainage and rainproof measures for the site. The construction access road shall be built according to the large load of construction traffic and construction machinery.

注意点：

Notes:

可以通过基层承载力的提高从根本上实现道路等级的提高，这对低等级公路尤其有特殊意义。

The road grade can be fundamentally improved by improving the bearing capacity of the base, which is of special significance for low-grade highways.

冷再生施工产生的均匀的较厚铺层内，不存在传统施工方法中有时出现的较薄铺层间的薄弱界面。

There is no weak interface between the thinner pavements that sometimes occurs in the traditional construction method in the uniform thick pavements generated by the cold recycling construction.

由于冷再生施工为一次性作业方式，再生机组在暴露的路基上只通过一次。所以与传统施工方法相比，对路基的损害较小。

Since the cold regeneration construction is a one-time operation, the regeneration unit only passes through the exposed subgrade once. Therefore, compared with the traditional construction method, the damage to the subgrade is small.

所有旧铺层材料全部就地利用，从而大大减少了新材料的用量，保护了资源。

All old paving materials are used locally, thus greatly reducing the consumption of new materials and protecting resources.

此外要做好相关人员的技术培训和技术交底工作,使参与施工的全体人员充沛认识高速铁路路基填筑的关键技术、质量控制要点。更多相关内容就来我们网站咨询了解吧！

In addition, the technical training and technical disclosure of relevant personnel shall be well done to make all personnel involved in the construction fully understand the key technologies and quality control points of high-speed railway subgrade filling. For more information, please visit our website Consult and understand!