与传统施工方法相比，就地冷再生技术具有诸多优点，概括起来可归纳为以下6点：

Compared with traditional construction methods, in-situ cold regeneration technology has many advantages, which can be summarized as the following 6 points:

1.成本低

1. Low cost

道路就地冷再生机由于全部利用了旧的路面铺层材料，从而减少了道路维修或改造时旧铺层材料的开挖、运输、废置和新材料的购置，从而导致成本大幅度下降。采用道路就地冷再生比传统方式相比，随着再生层厚度的不同，可以降低成本，冷再生路面厚度越厚，降低成本越多。

Due to the full use of the old pavement paving materials, the road in-situ cold recycling machine reduces the excavation, transportation, disposal of the old paving materials and the purchase of new materials during road maintenance or reconstruction, resulting in a significant reduction in costs. Compared with the traditional method, the cost can be reduced with the different thickness of the regeneration layer. The thicker the cold regeneration pavement is, the more the cost will be reduced.

2.效率高

2. High efficiency

道路就地冷再生机械施工一次性可以完成铣刨、破碎、添加、拌和及摊铺，从而简化了施工程序，缩短施工工期。使用就地冷再生机械，每天施工可完成的工作量。

The construction of road in-situ cold recycling machinery can complete milling, crushing, adding, mixing and paving at one time, which simplifies the construction procedure and shortens the construction period. Using local cold regeneration machinery, the daily construction can complete the workload of square meters.

3.受天气条件影响小

3. Little affected by weather conditions

旧地冷再生能够在天气环境不确定的条件下施工，除了在降雨量较大时，一般的阴晴不定的天气，小雨天气，冷再生机均可施工，即使在大雨过后，也可马上恢复施工。

The old land cold regeneration machine can be constructed under the condition of uncertain weather environment. Except in the case of heavy rainfall, the cold regeneration machine can be constructed in general cloudy and sunny weather, light rain weather, and even after heavy rain, the construction can be resumed immediately.

4.对公共交通影响显着减少

4. Significantly reduce the impact on public transport

冷再生工艺施工的特点是冷再生工序简单，施工设施少，对交通干扰反映不敏感整个冷再生机械组合可以处于同一条车道内，不影响另一条车道车辆通行，可进行开放式施工，特别适用于交通量较大或路宽较窄情况下的道路的施工。

The characteristics of cold regeneration process construction are that the cold regeneration process is simple, the construction facilities are few, and it is insensitive to traffic interference. The whole cold regeneration machinery combination can be in the same lane, which does not affect the traffic of another lane. It can carry out open construction, especially suitable for the construction of roads with large traffic volume or narrow road width.

5.施工质量好

5. Good construction quality

就地冷再生可以根据不同道路旧铺层材料的实际情况进行设计，选择不同的添加剂，配比准确，可以保证再生材料的品质和施工质量，形成施工成型厚而均匀的粘结层，从而保证了维修后道路的使用期限。

The in-situ cold recycling can be designed according to the actual situation of the old paving materials of different roads. Different additives are selected and the proportion is accurate, which can ensure the excellent quality and construction quality of the recycled materials and form a thick and uniform bonding layer formed during construction, so as to ensure the service life of the road after maintenance.

6.具有优势

6. Environmental protection advantages

冷再生机出租厂家认为使用传统的道路维修方法，沥青路面废弃量十分巨大，对环境造成污染，大量新材料的开采，也会造成资源减少和环境的破坏，采用冷再生施工工艺，不需处理另外处理废弃料，可完全避免上述问题。它不仅可以节约大量投资，更有利于环境保护，因此被人们称之为“绿色”施工技术。

The rental manufacturer of cold recycling machine believes that using the traditional road maintenance method, the waste of asphalt pavement is very huge, which will cause pollution to the environment. The exploitation of a large number of new materials will also cause resource reduction and environmental damage. The above problems can be completely avoided by adopting the cold recycling construction process without dealing with other waste materials. It can not only save a lot of investment, but also be more conducive to environmental protection, so it is called "green" construction technology.

冷再生施工工艺的优越性，以及其产生的巨大的社会效益和经济效益，必将会使路面冷再生机得到越来越广泛的应用，所以如果您有购买需求就来我们网站先做咨询吧。

The advantages of the cold recycling construction process, as well as the huge social and economic benefits it produces, will make the road surface cold recycling machine more and more widely used, so if you have a purchase demand, please come to our website Consult first.