小型压路机在操作方面要严格按照说明书来，由于小视频视觉的冲击，现在我们很少看文字的东西，但是切不可疏忽。你认为对的的操作方法，可能在使用一段时间之后会适得其反。接下来将几条比较关键的施工操作要点：

Small road rollers should be operated in strict accordance with the instructions. Due to the visual impact of small videos, we seldom read words, but we must not neglect them. The operation method you think is right may backfire after being used for a period of time. Next, several key construction operation points will be introduced:

1，操作小型压路机寸要一直坐在操作椅上。

1. Always sit on the operating chair when operating a small roller.

2，冷再生机租赁厂家认为当在不平整路面，斜坡，柔软或者粗糙的材料上操作时要保持警惕。机器可能会发生意外移动或滑行。

2. The rental manufacturer of cold recycling machine believes that it is necessary to be vigilant when operating on uneven roads, slopes, soft or rough materials. The machine may move or slide unexpectedly.

3，在煤矿，沟渠或者站台边缘工作时要小心，检查确保路面足够稳定可以承载机器和操作人员的重量，不会出现轮子的滑行，坠落或者倾斜。

3. Be careful when working at the edge of coal mines, ditches or platforms, and check to ensure that the road surface is stable enough to carry the weight of machines and operators, and there will be no wheel sliding, falling or tilting.

4，操作小型压路机要穿适合工作地点的防护衣服。保证手，脚和宽松衣服远离正在运行的设备零件。

4. Wear protective clothing suitable for the working place when operating a small roller. Keep hands, feet and loose clothes away from running equipment parts.

5，禁止发动机丁作中或者机器刚关闭后立即触摸发动机或者消音器，这些区域此时很热可能会导致灼伤。

5. It is forbidden to touch the engine or muffler immediately after the engine is working or the machine has just been shut down. These areas are very hot at this time, which may cause burns.

6，禁止在燃料盖松开或缺失的情况下操作机器。

6. It is forbidden to operate the machine when the fuel cap is loose or missing.

7，禁止在机器运转时擅离职守。

7. It is forbidden to leave without permission when the machine is running.

8，使用防护装置丼且按照工作顺序操作小型压路机，禁止任何未经培训的人员操作机器，操作者应该熟悉或者了解本设备相关潜在的危险。所以如果您有什么不明白的地方随时来咨询我们吧。

8. Use the protective device well and operate the small roller according to the working sequence. It is forbidden for any untrained personnel to operate the machine. The operator should be familiar with or understand the potential hazards related to this equipment. So if you don't understand anything, please feel free to consult us OK.